Tag Archives: Hot Glue

Evil Mutant Fairy Plastics:  5 lectures and workshops at Costume College 2012

Evil Mutant Fairy Plastics 1: Breaking all the Rules, PowerPoint Slide Show:

Evil Mutant Fairy Plastics 2: Torquing Tyvek

Evil Mutant Fairy Plastics3: Warped Wings

Evil Mutant Fairy Plastics 4: Creepy Claws

Evil Mutant Fairy Plastics 5: Electric Wigs

“Pool Noodle Wig” Project

Tara in Pool Noodle wig
Tara in a Pool Noodle 18th Century Style Wig
Wedding Singer Ethafoam wigs on the Las Vegas Impersonators
Actors in DVC’s The Wedding Singer as the Vegas Impersonators (Tina Turner, Billy Idol, Mr T, Cyndi Lauper, Imelda Marcos) wearing wigs made with ethafoam:

Assignment: First watch the video at Pool Noodle “Wig” Tutorial by Tara  

Pool Noodle “Wig” Tutorial by Tara  
  1. Read the tutorial down below these steps for an 18th century “Pouf” wig from pool noodle and hair curler foam onto a baseball hat base.
  2. Make a lightweight wig/headdress of your design out of any variety of foam you have on hand.  You can also use craft foam, expanding foam, mattress pad foam, polystyrene bead board  (usually incorrectly called styrofoam), actual Styrofoam, or insulation board foam (aka “Pink foam”, “Blue foam”) Ethafoam or EVA foam, or foam core.  The idea is to make something big, weird, fun and lightweight at relatively low cost.  You may decorate the surface with paint, fabric, glitter, fake fur or any other insanity that occurs to you. 
  3. Check out these pins for inspiration: Foam Wigs 
  4. Check out this Youtube playlist: Foam Wigs & Sculpture Tutorials  and this company’s tutorials: FollyFoam

The Tutorial:  Steps for making an 1770s Marie Antoinette “Pouf” wig from a $1 baseball cap, 3 pool noodles, some foam curlers and hot melt glue (on a cool setting).

You will need:

  • Rubber coated work gloves like these.
  • Low-temp or dual temp glue gun that can be set to “low”
  • Clear multi-temp melt glue sticks
  • 2-3 pool noodles
  • Package of yellow foam curlers
  • Baseball cap
  • Skinny sharp snap-off utility knife like these.
  • Craft Scissors
  • Some random fake flowers, ribbons, decorations, etc to taste (and for convenient hiding of mistakes.)
  1. Making of the Wig: Begin by de-billing a baseball cap with your craft scissors leaving about 1/8″ of the brim in place for added hat stability.  Do NOT cut into the stitching that sandwiches the bill between the internal headband facing and the front of the cap. It is easiest to avoid this by doing the cut while the hat is held upside down.
CoCoFriday 001.JPG

2. Lo-temp hot glue the bill down the back of the cap by either side of the back adjustment flap to make an adjustable “wig cap” base. NOTE: Hi Temp Glue will slow down this entire process, make it extra difficult and make for less satisfactory results.  If you only have a Hi temp gun, try plugging in, and unplugging repeatedly to get a lower temperature, or stick your gun into a lamp dimmer and turn down the heat that way.  CoCoFriday 003.JPG CoCoFriday 002.JPG CoCoFriday 004.JPG

3. Slice half a noodle into lengthwise thirds with a thin utility knife, extended out 2″. Do remember to wear your non-dominant hand glove for all this.

CoCoFriday 008.JPG

4. Shave the ends down (with the knife extended 3″) as shown. CoCoFriday 009.JPG CoCoFriday 010.JPG CoCoFriday 010.JPG

CoCoFriday 013.JPG

5. Low temp glue the shaved ends of the 1/3 noodle pieces to the center front of the de-billed cap. Do remember to wear your non-dominant hand glove for all this so you are less likely to get burns.  CoCoFriday 014.JPG

CoCoFriday 015.JPG

6. Check the back of the “wig” and see where you can taper the noodles towards the center back. Here the center noodle strip is shaved to the length needed to make the height of the “pouf” curve.  

CoCoFriday 016.JPG

7. Then the two side 1/3rd noodles are glued together on their edges to form a wide strip.  (Links to an external site.)Then the strip is shaved and glued to the former “bill” that has previously been made into a back piece. (Don’t glue the piece to the little adjuster strip that is in the back gap as this prevents adjusting the wig for comfort, and makes the back of the wig dimple, and be even warmer than it is normally.) Then the center strip is glued on top of the broad strip.

CoCoFriday 019.JPG

8. Begin adding the remaining parts of the 1/3 strips and the 1/4 strips to the sides of the wig to complete the “pouf”. Tuck ends to the inside of the original band of strips as you go from the top down.  

9. After you get 1/2 way down, roughing out the basic shape of the pouf, you will need to add smaller shaved bits to the sides to bridge the gap from the edge of the cap to the middle of the pouf. This is where it really helps to have an historical reference to help you decide the way to sub-slice those pieces and place them into the design. This is really just a matter of eyeballing the gaps, slicing, gluing and filling in as best you can. Each wig is a little different around here depending on height and overall design, so I can’t run you through the “steps” since they are just random, go as looks best, filler. Remember also, if you know your design is going to have curls covering a section, this is where you can fill in with the ugly little leftovers of the noodle for putting in structure that lies beneath like lathe in a plaster wall.  

10. Here I add bits that go down over the “sideburn” area of the face. If you ever want to make one of these with a more realistic look on the hairline, after completing the wig to the level I have done, then slice lots of tiny strips of the foam, and carefully glue (with Ultra-Cool melt glue & Gun) them to the edge of the wig while it is sitting on the actor’s head, covering and blending over the natural hairline. DO NOT get glue in the actor’s hair. While Ultra-cool glue wont burn them, pulling off the wig if it is glued into their hair will please them less than a bikini-wax.

Note: You are not hallucinating by the way, there are two different colored yellow pool noodles in this wig. It keeps the look more interesting, but you must be careful to use your noodle colors symmetrically so you won’t have a wig that is mainly one color, with a clot of a different color in just one area. Blend the different color throughout in symmetrical streaks for best results, or use the lighter color for the outer most “high” points like a highlight.  

11: Now for the really fun part. (Not a joke, this is fun and easy unless your blade is dull.) Do remember to wear your non-dominant hand glove for all this. Set your knife at 1.5″-2″ depending on noodle thickness, then spiral cut a curl into a section of noodle. Do this by holding the knfe steady, and twirling the noodle into it. This is not only safer, but easier. If you are having trouble doing this, the blade has got dull. Snap off 2″ of blade and move down to a section of fresh blade and it should cut easier.

12: Stick on some curls:

13: Put in more filler where the bigger curls will hide the rough “lathe” structure:  

14. Spiral cut your big curls:  

15: Stick on some big curls:  

16. OK, weirdly this is the tough part: Pull out your bag of little foam curlers. Remove them from the plastic bits, and carefully snip them into spiral ringlets with your craft scissors. They will fight you, but don’t try the utility knife unless you want lots of cuts in you, and really nasty ones in the curlers. Just slowly snip them into a spiral with the scissors.  

17. Now you can use them as filler in between gaps in the big curls where needed, where your design requires small curls, and in places that are looking a bit “off” where a curl would effectively hide a flaw.  

18. Inevitably, some place will visually need either disguise because of some minor visual “ooops!”, or simply need visual punctuation with flowers, ribbons or other decorations. Glue them on as your final step.

Optional Step on The Finished Wig. Note you also see on here a whiff of colored hair spray which I used in my CoCo 2014 demo on Dollar Store Costume Accessories in order to not poison my class with using real Spray Paint indoors. Using a little bit of carefully applied spray paint “shadows” in orange or pink to a foam wig gives it that extra dimension on stage, and can stop the color of the noodles looking so flat.

CoCo2014Sunday 015.JPG
CoCo2014Sunday 016.JPG
CoCo2014Sunday 017.JPG
CoCo2014Sunday 018.JPG
CoCo2014Sunday 019.JPG
CoCo2014Sunday 014.JPG

Steps for an Ethafoam wig on a buckram base for a Reagan impersonator in The Wedding Singer:

ReaganWig 169.JPG
ReaganWig 174.JPG
ReaganWig 179.JPG
ReaganWig 187.JPG
ReaganWig 191.JPG
ReaganWig 202.JPG
ReaganWig 200.JPG
WeddingSingerNov9th2014 941b.jpg
WeddingSingerOpeningGala 001.JPG

Cyndi Lauper Ethafoam Wig from DVC’s Wedding Singer by Eden 

WeddingSingerOpeningGala 020.JPG
WeddingSingerOpeningGala 004.JPG

Evil Mutant Fairy Plastics 4: Creepy Claws – Limited Workshop – Costume College 2012

Free PDF Handout for making Evil Mutant Fairy Plastic Creepy Claw Project by Tara Maginnis

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Read the pdf to learn how to make easy evil fairy claws like these using dollar store parts.

Hot Glue Guns Compared

I recently tested a bunch of hot glue guns in an effort to learn more about their properties.  I freely sent a report on my results to a company that makes these guns in the interest of their improving their products.  Here is the report: Hot Glue Pen and Gun Reviews Small PDF

       

More Than You Ever Wanted to Know About Hot Glue, Costume College 2015

PDF  2015-hot-glue-notes

Student Handout
Student Handout

Student Handout
Student Handout

Student Handout
Student Handout

Student Handout
Student Handout

Student Handout
Student Handout

Student Handout
Student Handout

Student Handout
Student Handout

HotGlueHandout08

Some Examples shown in the Live workshop presentation:

Parchment paper is formed into small cones
Parchment paper is formed into small cones

Hot Glue is formed in a swirl over a cone of cooking parchment
Hot Glue is formed in a swirl over a cone of cooking parchment

hotglue 004 (2) hotglue 007 (2)

hotglue 006 (2) glueruff 004 glueruff 002 glueruff 001 DVC_HotGlue 032 DVC_HotGlue 009

To Make a Necklace, Draw a pattern on paper and cover the paper with cooking parchment
To Make a Necklace, Draw a pattern on paper and cover the paper with cooking parchment

Put hot glue (in this case glitter glue) onto the parchment and pull off when cool
Put hot glue (in this case glitter glue) onto the parchment and pull off when cool

glueruff 006

earrings 007 earrings 005 earrings 004

hot glue pineapple 006 hot glue pineapple 008 Pink Glue Tiara 001 Pink Glue Tiara 004 Pink Glue Tiara 005 Pink Glue Tiara 007

001 002 003 004 005 006 007 008 009 010 011

DVC_HotGlue 069 DVC_HotGlue 068 CoCoProjects 065 CoCoProjects 067 MakeupFinals 401

HotGlueCollar 005 HotGlueCollar 018 HotGlueCollar 021 HotGlueCollar 022 HotGlueCollar 024 HotGlueCollar 026 HotGlueCollar 037 HotGlueCollar 038 HotGlueCollar 038 HotGlueCollar 039 HotGlueCollar 044 HotGlueCollar 045 HotGlueCollar 056 HotGlueCollar 059 Pink Glue Tiara 014 Pink Glue Tiara 015

More Than You Ever Wanted To Know About Hot Glue, Workshop, Costume College 2015

Room-Poster:

2015-hot-glue-notes PDF Handout

The PowerPoint part of the Lecture/Demo:

Class Handout:

Samples: Creation of a Hot Glue Fairy Wing

Samples: Elizabethan Collar

Project: Hot Glue Necklaces

Project: Pink Glue Tiara

Projects: Jewelry made by filling silicone molds with glue for parts

Project: Golden Ruff